Find a Service Center
- Single Row Angular Contact Bearing, 80 mm ID x 170 mm OD x 78 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Outer Ring Width | 78 mm |
| Bore Type | Round Bore |
| Fillet Radius | 2 mm |
| Enclosure | Open |
| Seal Material | None |
| Limiting Speed - Oil | 4700 rpm |
| Temperature Range [Max] | 450 °F |
| Ball Material | Steel |
| Origin | Single Row Angular Contact |
| Lubricant | Oil Preservative |
| Precision Level | Standard (ABEC 1) |
| Capacity | Standard Capacity |
| Material | Steel |
| O.D. | 170 mm |
| Precision | Standard |
| Static Load Rating | 110 kN |
| Cage Type | Metal |
| Inch/Metric | Metric Bore |
| Cage Material | Brass/Bronze |
| Rows of Balls | Single |
| Contact Angle | 40° |
| Static Load Rating [Max] | 27000 lbf |
| icNumber | 7702945 |
| Width | 78.000 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Radial Internal Clearance | Normal |
| Dynamic Load Rating | 32100 lbf |
| No. in Set | Duplex Set |
| I.D. | 80 mm |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| Internal Design | Universal Mounting |
| Limiting Speed - Grease | 3600 rpm |
| Seal Type | Unsealed |
| Locking Device | No Locking Device |
| Inner Ring Width | 78 mm |
| O.D. Type | Straight |
| Bearing Type | Angular Contact |
| Series | 7300P |
| Flush Ground | Yes |
| Weight | 8.8 LB |
| EAN or UPC | 97741017947 |
