Find a Service Center
- Single Row Angular Contact Bearing, 130 mm ID x 230 mm OD x 40 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Enclosure | Open |
| Fillet Radius | 2.5 mm |
| Inch/Metric | Metric |
| Bearing Type | Unmounted, Angular Contact |
| Seal Material | None |
| Static Load Rating [Max] | 43400 lbf |
| Origin | Single Row Angular Contact |
| Ball Material | Steel |
| Material | Bearing Steel |
| Cage Type | Metal |
| Preload Level | Light |
| Capacity | Standard Capacity |
| Rows of Balls | Single |
| Width | 1.77 in, 45 mm |
| Seal Type | Unsealed |
| Temperature Range [Max] | 450 °F |
| Cage Material | Brass |
| Internal Design | Universal Mounting |
| I.D. | 5.12 in, 130 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Static Load Rating | 193 kN |
| Limiting Speed - Oil | 2800 rpm |
| Precision Level | Standard (ABEC 1) |
| Flush Ground | Yes |
| Snap Ring | No Snap Ring |
| Contact Angle | 40 Degree |
| Dynamic Load Rating | 186 kN |
| O.D. Type | Cylindrical |
| Locking Device | No Locking Device |
| Bore Type | Cylindrical |
| Inner Ring Width | 1.77 in, 45 mm |
| Limiting Speed - Grease | 1900 rpm |
| Precision | Standard |
| Radial Internal Clearance | Normal |
| Series | 7200P |
| No. in Set | Duplex Set |
| icNumber | 7702939 |
| O.D. | 9.06 in, 230 mm |
| Lubricant | Oil Preservative |
| Outer Ring Width | 1.77 in, 45 mm |
| Weight | 16.182 LB |
| EAN or UPC | 97741017107 |
