Find a Service Center
- Single Row Angular Contact Bearing, 130 mm ID x 230 mm OD x 40 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Limiting Speed - Grease | 1900 rpm |
| Limiting Speed - Oil | 2800 rpm |
| Bearing Type | Unmounted, Angular Contact |
| Static Load Rating | 193 kN |
| Internal Design | Universal Mounting |
| Flush Ground | Yes |
| icNumber | 7702939 |
| Material | Bearing Steel |
| Cage Type | Metal |
| Preload Level | Light |
| Cage Material | Brass |
| Dynamic Load Rating | 186 kN |
| O.D. Type | Cylindrical |
| Lubricant | Oil Preservative |
| Snap Ring | No Snap Ring |
| I.D. | 5.12 in, 130 mm |
| Capacity | Standard Capacity |
| Seal Material | None |
| Radial Internal Clearance Specification | Normal Clearance |
| Contact Angle | 40 Degree |
| Locking Device | No Locking Device |
| Width | 1.77 in, 45 mm |
| Static Load Rating [Max] | 43400 lbf |
| Precision | Standard |
| Seal Type | Unsealed |
| Series | 7200P |
| No. in Set | Duplex Set |
| Fillet Radius | 2.5 mm |
| Inner Ring Width | 1.77 in, 45 mm |
| Bore Type | Cylindrical |
| Ball Material | Steel |
| Rows of Balls | Single |
| Temperature Range [Max] | 450 °F |
| Precision Level | Standard (ABEC 1) |
| O.D. | 9.06 in, 230 mm |
| Radial Internal Clearance | Normal |
| Enclosure | Open |
| Origin | Single Row Angular Contact |
| Outer Ring Width | 1.77 in, 45 mm |
| Inch/Metric | Metric |
| Weight | 16.182 LB |
| EAN or UPC | 97741017107 |
