
- Single Row Angular Contact Bearing, 55 mm ID x 100 mm OD x 21 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Contact Angle | 40° |
Snap Ring | No Snap Ring |
Bearing Type | Angular Contact |
O.D. | 100 mm |
Cage Material | Brass/Bronze |
Limiting Speed - Oil | 7800 rpm |
Material | Steel |
Series | 7200PJ |
Dynamic Load Rating | 11000 lbf |
Width | 21.000 mm |
Rows of Balls | Single |
Precision Level | Standard (ABEC 1) |
No. in Set | Single Bearing |
Preload Level | None |
Internal Design | Universal Mounting |
Capacity | Standard Capacity |
Origin | Single Row Angular Contact |
Seal Material | None |
icNumber | 7695855 |
Flush Ground | Yes |
Seal Type | Unsealed |
Fillet Radius | 1.5 mm |
Inner Ring Width | 21 mm |
Enclosure | Open |
Lubricant | Oil Preservative |
Bore Type | Round Bore |
Static Load Rating [Max] | 8430 lbf |
Outer Ring Width | 21 mm |
O.D. Type | Straight |
Cage Type | Metal |
Temperature Range [Max] | 450 °F |
Limiting Speed - Grease | 6000 rpm |
Ball Material | Steel |
I.D. | 55 mm |
Static Load Rating | 38 kN |
Radial Internal Clearance | Normal |
Precision | Standard |
Radial Internal Clearance Specification | Normal Clearance |
Inch/Metric | Metric Bore |
Locking Device | No Locking Device |
Weight | 1.448 LB |
EAN or UPC | 97741016605 |
