Find a Service Center
- Single Row Angular Contact Bearing, 55 mm ID x 100 mm OD x 21 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Seal Type | Unsealed |
| Rows of Balls | Single |
| Cage Type | Metal |
| Enclosure | Open |
| Contact Angle | 40° |
| Static Load Rating [Max] | 8150 lbf |
| Precision | Standard |
| Radial Internal Clearance | C3 |
| Snap Ring | No Snap Ring |
| Bearing Type | Angular Contact |
| Origin | Single Row Angular Contact |
| No. in Set | Single Bearing |
| Lubricant | Oil Preservative |
| Cage Material | Brass/Bronze |
| I.D. | 55 mm |
| Preload Level | None |
| Dynamic Load Rating | 11800 lbf |
| Fillet Radius | 0.059 in |
| O.D. | 100 mm |
| Material | Steel |
| Inch/Metric | Metric Bore |
| Capacity | Standard Capacity |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bore Type | Round Bore |
| Seal Material | None |
| icNumber | 7695855 |
| Outer Ring Width | 21 mm |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 21 mm |
| O.D. Type | Straight |
| Locking Device | No Locking Device |
| Ball Material | Steel |
| Weight | 1.4 LB |
| EAN or UPC | 87796044074 |
