Skip to content Skip to navigation menu
5300-C, 5300-SB Medium Series Bearing

5309CZZG

5300-C, 5300-SB Medium Series Bearing
Item #102142741
  • 45 mm ID x 100 mm OD x 1 9/16" Wide
  • Double Sealed
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
5300-C, 5300-SB Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 45 mm ID x 100 mm OD x 1 9/16" Wide
  • Double Sealed
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Radial Internal Clearance Specification Normal Clearance
Dynamic Load Rating 72.8 kN
Width 1.56 in, 39.69 mm
Inner Ring Width 1.56 in, 39.7 mm
Inch/Metric Metric
Snap Ring With Snap Ring
Bearing Type Unmounted, Angular Contact
Seal Material Nitrile Rubber (NBR)
Precision Standard
O.D. Type Cylindrical
Precision Level Standard (ABEC 1)
Limiting Speed - Oil 6000 rpm
Radial Internal Clearance C3
icNumber 7701677
Rows of Balls Double
Fillet Radius 1.5 mm
Outer Ring Width 1.56 in, 39.7 mm
Temperature Range [Min] -22 °F
Locating Snap Ring Fitted
Cage Type Metal
Locking Device No Locking Device
Series 5300C
Enclosure Seal On Both Sides
Capacity Standard Capacity
Preload Level C3 Axial Clearance
Cage Material Bearing Steel
Flush Ground No
Static Load Rating 53 kN
Lubricant Grease
Limiting Speed - Grease 4500 rpm
Origin Double Row Deep Groove
Seal Type Contacting Seal
Material Bearing Steel
No. in Set Single Bearing
O.D. 4.19 in, 106.5 mm
Limiting Speed - Sealed 4500 rpm
I.D. 1.77 in, 45 mm
Static Load Rating [Max] 11900 lbf
Contact Angle 30 Degree
Bore Type Cylindrical
Ball Material Steel
Temperature Range [Max] 250 °F
Weight 3.001 LB
EAN or UPC 97741014816
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison