Skip to content Skip to navigation menu
5300-C, 5300-SB Medium Series Bearing

5309CZZG

5300-C, 5300-SB Medium Series Bearing
Item #102142741
  • 45 mm ID x 100 mm OD x 1 9/16" Wide
  • Double Sealed
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
5300-C, 5300-SB Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 45 mm ID x 100 mm OD x 1 9/16" Wide
  • Double Sealed
  • With Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
O.D. 4.19 in, 106.5 mm
Material Bearing Steel
Limiting Speed - Grease 4500 rpm
Origin Double Row Deep Groove
Dynamic Load Rating 72.8 kN
Lubricant Grease
Static Load Rating [Max] 11900 lbf
Precision Standard
Series 5300C
Seal Type Contacting Seal
Temperature Range [Min] -22 °F
Outer Ring Width 1.56 in, 39.7 mm
Temperature Range [Max] 250 °F
Inch/Metric Metric
Inner Ring Width 1.56 in, 39.7 mm
Bearing Type Unmounted, Angular Contact
Enclosure Seal On Both Sides
Flush Ground No
Ball Material Steel
Contact Angle 30 Degree
Radial Internal Clearance C3
Radial Internal Clearance Specification Normal Clearance
Preload Level C3 Axial Clearance
Locating Snap Ring Fitted
Limiting Speed - Sealed 4500 rpm
Fillet Radius 1.5 mm
Precision Level Standard (ABEC 1)
Static Load Rating 53 kN
Snap Ring With Snap Ring
No. in Set Single Bearing
O.D. Type Cylindrical
Cage Type Metal
Bore Type Cylindrical
I.D. 1.77 in, 45 mm
Width 1.56 in, 39.69 mm
Seal Material Nitrile Rubber (NBR)
Capacity Standard Capacity
Cage Material Bearing Steel
Rows of Balls Double
Limiting Speed - Oil 6000 rpm
icNumber 7701677
Locking Device No Locking Device
Weight 3.001 LB
EAN or UPC 97741014816
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison