Skip to content Skip to navigation menu
Double Row Cylindrical Bore Angular Contact Ball Bearing

5219C

Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #101170753
  • Unmounted, Angular Contact Bearing
  • 3.74 in Inner Diameter
  • 6.69 in Outer Diameter
  • 2.19 in Width
  • Bearing Steel Material
  • Cylindrical O.D
  • 2.19 in Outer Ring Width
  • Double Row
  • Metric
+ Show More + Show Less
Double Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Unmounted, Angular Contact Bearing
  • 3.74 in Inner Diameter
  • 6.69 in Outer Diameter
  • 2.19 in Width
  • Bearing Steel Material

applications

  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
O.D. 6.69 in, 170 mm
Series 5200C
Precision Standard
Cage Material Bearing Steel
Capacity Standard Capacity
Bore Type Cylindrical
Cage Type Metal
Ball Material Steel
Inner Ring Width 2.19 in, 55.6 mm
icNumber 7697320
Material Bearing Steel
Width 2.19 in, 55.56 mm
Inch/Metric Metric
Bearing Type Unmounted, Angular Contact
Preload Level C3 Axial Clearance
Outer Ring Width 2.19 in, 55.6 mm
Dynamic Load Rating 159 kN
O.D. Type Cylindrical
Flush Ground No
Lubricant Oil Preservative
Limiting Speed - Sealed 2200 rpm
Radial Internal Clearance Normal
Seal Type Unsealed
Limiting Speed - Grease 2200 rpm
Enclosure Open
Precision Level Standard (ABEC 1)
Static Load Rating [Max] 32800 lbf
Seal Material None
Limiting Speed - Oil 3200 rpm
Static Load Rating 146 kN
Contact Angle 30 Degree
Snap Ring No Snap Ring
Fillet Radius 2 mm
Locking Device No Locking Device
No. in Set Single Bearing
Rows of Balls Double
Radial Internal Clearance Specification Normal Clearance
I.D. 3.74 in, 95 mm
Weight 10.27 LB
EAN or UPC 97741059169
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison