Skip to content Skip to navigation menu
Double Row Cylindrical Bore Angular Contact Ball Bearing

5219C

Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #101170753
  • Unmounted, Angular Contact Bearing
  • 3.74 in Inner Diameter
  • 6.69 in Outer Diameter
  • 2.19 in Width
  • Bearing Steel Material
  • Cylindrical O.D
  • 2.19 in Outer Ring Width
  • Double Row
  • Metric
+ Show More + Show Less
Double Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Unmounted, Angular Contact Bearing
  • 3.74 in Inner Diameter
  • 6.69 in Outer Diameter
  • 2.19 in Width
  • Bearing Steel Material

applications

  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Static Load Rating [Max] 32800 lbf
Width 2.19 in, 55.56 mm
Cage Material Bearing Steel
Precision Standard
Lubricant Oil Preservative
Limiting Speed - Grease 2200 rpm
Ball Material Steel
Radial Internal Clearance Specification Normal Clearance
O.D. Type Cylindrical
Radial Internal Clearance Normal
Flush Ground No
Locking Device No Locking Device
Dynamic Load Rating 159 kN
Series 5200C
Bearing Type Unmounted, Angular Contact
Seal Type Unsealed
icNumber 7697320
Inch/Metric Metric
Seal Material None
Limiting Speed - Sealed 2200 rpm
Material Bearing Steel
Contact Angle 30 Degree
Outer Ring Width 2.19 in, 55.6 mm
Enclosure Open
Rows of Balls Double
Bore Type Cylindrical
Fillet Radius 2 mm
Limiting Speed - Oil 3200 rpm
Snap Ring No Snap Ring
Precision Level Standard (ABEC 1)
O.D. 6.69 in, 170 mm
Preload Level C3 Axial Clearance
Cage Type Metal
Static Load Rating 146 kN
No. in Set Single Bearing
I.D. 3.74 in, 95 mm
Capacity Standard Capacity
Inner Ring Width 2.19 in, 55.6 mm
Weight 10.27 LB
EAN or UPC 97741059169
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison