Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
- Special internal radial clearance
- Special E grade balls
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
| Seal Type | Unsealed |
| O.D. Type | Straight |
| Precision | Super Precision |
| No. in Set | Single Bearing |
| Contact Angle | 15° |
| Enclosure | Open |
| Rows of Balls | Single |
| Snap Ring | No Snap Ring |
| Lubricant | Oil Preservative |
| Material | Steel |
| Precision Level | Extra Precision (ABEC 7) |
| Cage Material | Phenolic |
| Seal Material | None |
| Temperature Range [Max] | 225 °F |
| Capacity | Maximum Capacity |
| Inch/Metric | Metric Bore |
| Bearing Type | Dynamometer |
| Bore Type | Round Bore |
| Preload Level | None |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Locking Device | No Locking Device |
| Weight | 0.0 LB |
