Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
- Special internal radial clearance
- Special E grade balls
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
| Lubricant | Oil Preservative |
| Cage Material | Phenolic |
| Bearing Type | Dynamometer |
| Precision Level | Extra Precision (ABEC 7) |
| Seal Type | Unsealed |
| Snap Ring | No Snap Ring |
| Preload Level | None |
| O.D. Type | Straight |
| Temperature Range [Max] | 225 °F |
| Contact Angle | 15° |
| Bore Type | Round Bore |
| Inch/Metric | Metric Bore |
| Precision | Super Precision |
| Capacity | Maximum Capacity |
| Material | Steel |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Seal Material | None |
| Enclosure | Open |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Weight | 0.0 LB |
