Find a Service Center
- 60 mm ID x 130 mm OD x 31 mm Wide
- Single Shield
- With Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
features
- Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm 102181677
- 1
- Maximum radial load-carrying capacity
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| No. in Set | Single Bearing |
| Series | 63 |
| Seal Material | Tinplate |
| Radial Internal Clearance | Normal |
| Width | 1.22 in, 31 mm |
| Contact Angle | 0° |
| I.D. | 2.36 in, 60 mm |
| icNumber | 7704721 |
| Origin | Single Row Radial |
| Locking Device | No Locking Device |
| Bore Type | Cylindrical |
| Static Load Rating [Max] | 17500 lbf |
| Fillet Radius | 2 mm |
| Bearing Type | Deep Groove |
| Locating | Snap Ring Fitted |
| Cage Type | Metal |
| Snap Ring | With Snap Ring |
| Preload Level | None |
| Enclosure | Shield On One Side |
| Precision | Standard |
| Capacity | Maximum Capacity |
| O.D. | 5.12 in, 130 mm |
| Material | Bearing Steel |
| O.D. Type | Cylindrical |
| Radial Internal Clearance Specification | Normal Clearance |
| Precision Level | Standard (ABEC 1) |
| Outer Ring Width | 1.22 in, 31 mm |
| Temperature Range [Max] | 250 °F |
| Ball Material | Steel |
| Limiting Speed - Grease | 4300 rpm |
| Dynamic Load Rating | 20500 lbf |
| Rows of Balls | Single |
| Inch/Metric | Metric |
| Limiting Speed - Oil | 5300 rpm |
| Inner Ring Width | 1.22 in, 31 mm |
| Temperature Range [Min] | -22 °F |
| Cage Material | Bearing Steel |
| Seal Type | Non-Contacting Seal |
| Lubricant | Oil Preservative |
| Weight | 4.277 LB |
| EAN or UPC | 97741008600 |
