Find a Service Center
- 60 mm ID x 130 mm OD x 31 mm Wide
- Single Shield
- With Snap Ring
- Single Row Radial Steel Bearing
applications
- Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
features
- Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm 102181677
- 1
- Maximum radial load-carrying capacity
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Limiting Speed - Oil | 5300 rpm |
| Cage Type | Metal |
| Outer Ring Width | 1.22 in, 31 mm |
| Dynamic Load Rating | 20500 lbf |
| Static Load Rating [Max] | 17500 lbf |
| Inner Ring Width | 1.22 in, 31 mm |
| I.D. | 2.36 in, 60 mm |
| Limiting Speed - Grease | 4300 rpm |
| Seal Material | Tinplate |
| Seal Type | Non-Contacting Seal |
| Origin | Single Row Radial |
| Material | Bearing Steel |
| icNumber | 7704721 |
| Enclosure | Shield On One Side |
| Precision | Standard |
| Lubricant | Oil Preservative |
| Temperature Range [Min] | -22 °F |
| Bearing Type | Deep Groove |
| Ball Material | Steel |
| Bore Type | Cylindrical |
| Series | 63 |
| Temperature Range [Max] | 250 °F |
| Fillet Radius | 2 mm |
| Precision Level | Standard (ABEC 1) |
| Capacity | Maximum Capacity |
| Radial Internal Clearance | Normal |
| O.D. | 5.12 in, 130 mm |
| O.D. Type | Cylindrical |
| Rows of Balls | Single |
| Preload Level | None |
| No. in Set | Single Bearing |
| Inch/Metric | Metric |
| Cage Material | Bearing Steel |
| Width | 1.22 in, 31 mm |
| Locking Device | No Locking Device |
| Locating | Snap Ring Fitted |
| Snap Ring | With Snap Ring |
| Radial Internal Clearance Specification | Normal Clearance |
| Contact Angle | 0° |
| Weight | 4.277 LB |
| EAN or UPC | 97741008600 |
