Find a Service Center
- Deep Groove Bearing
- 1.77 in Inner Diameter
- 3.94 in Outer Diameter
- 0.98 in Width
- Bearing Steel Material
applications
- Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
features
- Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm 102175970
- 1
- Maximum radial load-carrying capacity
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Ball Material | Steel |
| Radial Internal Clearance | Normal |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Cylindrical |
| Snap Ring | With Snap Ring |
| Capacity | Maximum Capacity |
| Temperature Range [Max] | 450 °F |
| O.D. | 3.94 in, 100 mm |
| Rows of Balls | Single |
| Seal Type | Unsealed |
| icNumber | 7699749 |
| Precision | Standard |
| No. in Set | Single Bearing |
| Limiting Speed - Oil | 7000 rpm |
| Precision Level | Standard (ABEC 1) |
| Fillet Radius | 1.5 mm |
| I.D. | 1.77 in, 45 mm |
| Bearing Type | Deep Groove |
| Locking Device | No Locking Device |
| Material | Bearing Steel |
| Bore Type | Cylindrical |
| Series | 63 |
| Locating | Snap Ring Fitted |
| Cage Material | Bearing Steel |
| Limiting Speed - Grease | 5700 rpm |
| Origin | Single Row Radial |
| Enclosure | Open |
| Inch/Metric | Metric |
| Contact Angle | 0° |
| Inner Ring Width | 0.98 in, 25 mm |
| Width | 0.98 in, 25 mm |
| Lubricant | Oil Preservative |
| Preload Level | None |
| Outer Ring Width | 0.98 in, 25 mm |
| Seal Material | None |
| Static Load Rating [Max] | 10500 lbf |
| Cage Type | Metal |
| Pre Lubricant | None |
| Dynamic Load Rating | 13400 lbf |
| Weight | 2.037 LB |
| EAN or UPC | 97741007894 |
