Find a Service Center
- Deep Groove Bearing
- 1.77 in Inner Diameter
- 3.94 in Outer Diameter
- 0.98 in Width
- Bearing Steel Material
applications
- Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
features
- Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm 102175970
- 1
- Maximum radial load-carrying capacity
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| I.D. | 1.77 in, 45 mm |
| Origin | Single Row Radial |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| Static Load Rating [Max] | 10500 lbf |
| Material | Bearing Steel |
| Locating | Snap Ring Fitted |
| Fillet Radius | 1.5 mm |
| Ball Material | Steel |
| O.D. | 3.94 in, 100 mm |
| Temperature Range [Max] | 450 °F |
| Inch/Metric | Metric |
| Inner Ring Width | 0.98 in, 25 mm |
| Limiting Speed - Grease | 5700 rpm |
| Contact Angle | 0° |
| Precision Level | Standard (ABEC 1) |
| Cage Material | Bearing Steel |
| Radial Internal Clearance | Normal |
| icNumber | 7699749 |
| Radial Internal Clearance Specification | Normal Clearance |
| Width | 0.98 in, 25 mm |
| Lubricant | Oil Preservative |
| Enclosure | Open |
| Precision | Standard |
| Bore Type | Cylindrical |
| Limiting Speed - Oil | 7000 rpm |
| Rows of Balls | Single |
| Capacity | Maximum Capacity |
| Bearing Type | Deep Groove |
| Dynamic Load Rating | 13400 lbf |
| Outer Ring Width | 0.98 in, 25 mm |
| O.D. Type | Cylindrical |
| Series | 63 |
| Preload Level | None |
| Pre Lubricant | None |
| Seal Type | Unsealed |
| Seal Material | None |
| No. in Set | Single Bearing |
| Snap Ring | With Snap Ring |
| Weight | 2.037 LB |
| EAN or UPC | 97741007894 |
