Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- Special internal radial clearance
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
- Special E grade balls
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
| Inch/Metric | Metric Bore |
| Precision Level | Medium Precision (ABEC 5) |
| Cage Material | Phenolic |
| Rows of Balls | Single |
| Material | Steel |
| Seal Type | Unsealed |
| Bearing Type | Dynamometer |
| Ball Material | Steel |
| Capacity | Maximum Capacity |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Preload Level | None |
| Seal Material | None |
| No. in Set | Single Bearing |
| O.D. Type | Straight |
| Enclosure | Open |
| Lubricant | Oil Preservative |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Locking Device | No Locking Device |
| Temperature Range [Max] | 225 °F |
| Contact Angle | 15° |
| Weight | 0.0 LB |
