Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- Special internal radial clearance
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
- Special E grade balls
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
| Snap Ring | No Snap Ring |
| Preload Level | None |
| Temperature Range [Max] | 225 °F |
| Enclosure | Open |
| Seal Material | None |
| O.D. Type | Straight |
| Ball Material | Steel |
| No. in Set | Single Bearing |
| Locking Device | No Locking Device |
| Rows of Balls | Single |
| Contact Angle | 15° |
| Inch/Metric | Metric Bore |
| Cage Material | Phenolic |
| Bore Type | Round Bore |
| Material | Steel |
| Bearing Type | Dynamometer |
| Capacity | Maximum Capacity |
| Precision Level | Medium Precision (ABEC 5) |
| Seal Type | Unsealed |
| Lubricant | Oil Preservative |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Weight | 0.0 LB |
