Skip to content Skip to navigation menu
Cylindrical Bore Deep Groove Ball Bearing

211MG

Cylindrical Bore Deep Groove Ball Bearing
Item #102158361
  • Deep Groove Bearing
  • 2.17 in Inner Diameter
  • 3.94 in Outer Diameter
  • 0.83 in Width
  • Bearing Steel Material
  • Cylindrical O.D
  • 0.83 in Outer Ring Width
  • Metric
+ Show More + Show Less
Cylindrical Bore Deep Groove Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Deep Groove Bearing
  • 2.17 in Inner Diameter
  • 3.94 in Outer Diameter
  • 0.83 in Width
  • Bearing Steel Material

applications

  • Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant

features

  • Maximum radial load-carrying capacity
  • Ability to carry heavy combined radial and thrust loads
  • Designated as the notched type because it has a filling notch on one side of the inner and outer rings
  • Normally furnished with ABMA CO radial clearance
  • Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
  • Single-row maximum capacity filling-notch bearings

caution

  • Any attempt to replace Super Torque with any other synchronous belt will result in drastic reduction in belt life or possible immediate failure.
Locating Snap Ring Fitted
Ball Material Steel
Enclosure Open
O.D. 3.94 in, 100 mm
Locking Device No Locking Device
O.D. Type Cylindrical
Preload Level None
Precision Standard
I.D. 2.17 in, 55 mm
Material Bearing Steel
Limiting Speed - Grease 5200 rpm
Bearing Type Deep Groove
Cage Type Metal
Radial Internal Clearance Specification Normal Clearance
Seal Material None
Fillet Radius 1.5 mm
No. in Set Single Bearing
Contact Angle 0°
Snap Ring With Snap Ring
Width 0.83 in, 21 mm
Inch/Metric Metric
Cage Material Bearing Steel
Dynamic Load Rating 10900 lbf
Pre Lubricant None
Rows of Balls Single
Lubricant Oil Preservative
icNumber 7699747
Bore Type Cylindrical
Limiting Speed - Oil 6300 rpm
Capacity Maximum Capacity
Series 62
Outer Ring Width 0.83 in, 21 mm
Inner Ring Width 0.83 in, 21 mm
Seal Type Unsealed
Radial Internal Clearance Normal
Origin Single Row Radial
Precision Level Standard (ABEC 1)
Static Load Rating [Max] 9890 lbf
Temperature Range [Max] 450 °F
Weight 1.559 LB
EAN or UPC 97741004756
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison