211MG

Cylindrical Bore Deep Groove Ball Bearing

Item #102158361

Cylindrical O.D

0.83 in Outer Ring Width

Metric

+ Show More

Auto Replenish

each One-time purchase

Product Details

Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant

Maximum radial load-carrying capacity
Ability to carry heavy combined radial and thrust loads
Designated as the notched type because it has a filling notch on one side of the inner and outer rings
Normally furnished with ABMA CO radial clearance
Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
Single-row maximum capacity filling-notch bearings

Any attempt to replace Super Torque with any other synchronous belt will result in drastic reduction in belt life or possible immediate failure.

Specifications

Series	62
Seal Type	Unsealed
Fillet Radius	1.5 mm
Locating	Snap Ring Fitted
Inner Ring Width	0.83 in, 21 mm
I.D.	2.17 in, 55 mm
icNumber	7699747
Temperature Range [Max]	450 °F
Inch/Metric	Metric
O.D.	3.94 in, 100 mm
Limiting Speed - Grease	5200 rpm
Outer Ring Width	0.83 in, 21 mm
Origin	Single Row Radial
Seal Material	None
Bearing Type	Deep Groove
Enclosure	Open
O.D. Type	Cylindrical
Locking Device	No Locking Device
Ball Material	Steel
No. in Set	Single Bearing
Radial Internal Clearance	Normal
Width	0.83 in, 21 mm
Bore Type	Cylindrical
Radial Internal Clearance Specification	Normal Clearance
Snap Ring	With Snap Ring
Capacity	Maximum Capacity
Lubricant	Oil Preservative
Contact Angle	0°
Cage Type	Metal
Rows of Balls	Single
Limiting Speed - Oil	6300 rpm
Material	Bearing Steel
Static Load Rating [Max]	9890 lbf
Precision	Standard
Precision Level	Standard (ABEC 1)
Dynamic Load Rating	10900 lbf
Cage Material	Bearing Steel
Preload Level	None
Pre Lubricant	None
Weight	1.559 LB
EAN or UPC	97741004756