25GSA30 56C1.00

GSA Series Worm Gear Reducer

Item #102125693

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Not recommended for use in air brake systems where temperatures exceed 200 °F or where battery acid can drip on tubing.

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Thermal Input Horsepower @ 1750 RPM	N/A
Output Torque @ RPM	1155 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm
Box Width	6 5/8 in
Output Configuration	Hollow Shaft w/ Torque Arm
Input (Shaft or Bore) Size	5/8 in
Bolt Centers w/ Std. Base Kit (in)	N/A
Max. Thrust Load @ 1150 rpm	N/A
Base to Shaft Center Height Basic Unit	3 5/16 in
Input Base to Shaft Center Height Basic Unit	5 13/16 in
Torque Out @ 1750 rpm	1155 in lb
Input Configuration	C-Face Quilled
Box Height	8 1/4 in
Reduction Type	Single Reduction
Box Length	9 1/16 in
Frame Size	56C
Max. Overhung Load @ 1750 rpm	N/A
Center Distance	2.5 in
Worm Position	Top
Frame	56C
HP @ RPM	1 hp @ 1800 rpm
Washdown Duty	No
Ratio	30:1
Motor Application	General Purpose
Torque Out @ 1150 rpm	1390 in lb
Input HP @ RPM	1.13 hp @ 1150 rpm, 1.37 hp @ 1750 rpm
Output RPM @ 1750 rpm Input	58.33 rpm
Base to Shaft Center Height w/Std. Base Kit	N/A
Output (Shaft or Bore) Size	1 in
Weight	33.0 LB