25GSA30 56C1.00

GSA Series Worm Gear Reducer

Item #102125693

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Not recommended for use in air brake systems where temperatures exceed 200 °F or where battery acid can drip on tubing.

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Reduction Type	Single Reduction
Max. Overhung Load @ 1750 rpm	N/A
Bolt Centers w/ Std. Base Kit (in)	N/A
Torque Out @ 1750 rpm	1155 in lb
Frame Size	56C
Box Height	8 1/4 in
Input Base to Shaft Center Height Basic Unit	5 13/16 in
Input (Shaft or Bore) Size	5/8 in
Input HP @ RPM	1.13 hp @ 1150 rpm, 1.37 hp @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit	N/A
Thermal Input Horsepower @ 1750 RPM	N/A
Washdown Duty	No
Worm Position	Top
Motor Application	General Purpose
Input Configuration	C-Face Quilled
Ratio	30:1
Output (Shaft or Bore) Size	1 in
Output RPM @ 1750 rpm Input	58.33 rpm
Base to Shaft Center Height Basic Unit	3 5/16 in
Output Configuration	Hollow Shaft w/ Torque Arm
Max. Thrust Load @ 1150 rpm	N/A
Box Length	9 1/16 in
Center Distance	2.5 in
Frame	56C
Output Torque @ RPM	1155 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm
HP @ RPM	1 hp @ 1800 rpm
Box Width	6 5/8 in
Torque Out @ 1150 rpm	1390 in lb
Weight	33.0 LB