Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 32 Number of Teeth
- 8.803 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Diameter | 8.913 in |
| Length Through Bore | 3.5 in |
| Material | Cast Iron |
| Finished Bore | N/A |
| Belt Size | XH |
| Bore Range [Min] | 1.1875 in |
| Outside Dia. | 8.803 in |
| Bushing Type | Taper-Lock |
| Hub Projection | 1 in |
| Width Across Teeth | 2.25 in |
| Bushing Series | 3535 |
| Hub Type | B |
| Belt Width | 2 in |
| No. of Teeth | 32 |
| Hub Dia. | 6 1/2 in |
| Belt Pitch | 0.875 in |
| Bore Range [Max] | 3.5 in |
| Bore Type | Bushed |
| Type | CF |
| Weight | 32.0 LB |
| EAN or UPC | 697950083827 |
