Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 32 Number of Teeth
- 8.803 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 3.5 in |
| Bore Range [Max] | 3.5 in |
| Belt Pitch | 0.875 in |
| Hub Dia. | 6 1/2 in |
| Belt Size | XH |
| Outside Dia. | 8.803 in |
| Width Across Teeth | 2.25 in |
| Hub Type | B |
| Type | CF |
| Material | Cast Iron |
| Hub Projection | 1 in |
| No. of Teeth | 32 |
| Bore Type | Bushed |
| Belt Width | 2 in |
| Pitch Diameter | 8.913 in |
| Bore Range [Min] | 1.1875 in |
| Finished Bore | N/A |
| Bushing Type | Taper-Lock |
| Bushing Series | 3535 |
| Weight | 32.0 LB |
| EAN or UPC | 697950083827 |
