Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 48 Number of Teeth
- 7.588 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
- Agitators and mixers
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | SK |
| Hardened Teeth | With Hardened Teeth |
| Type | GF-1 |
| Belt Size | H |
| Bore Range [Max] | 2 5/8 in |
| Belt Pitch | 1/2 in |
| No. of Teeth | 48 |
| Bore Range [Min] | 1/2 in |
| Hub Type | A |
| Belt Width | 1 in |
| Material | Cast Iron |
| Finished Bore | N/A |
| Pitch Diameter | 7.639 in |
| Bushing Type | Quick Disconnect |
| Length Through Bore | 1.313 in |
| Outside Dia. | 7.5880 in |
| Bore Type | Bushed |
| Weight | 12.5 LB |
| EAN or UPC | 697950152288 |
