Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 48 Number of Teeth
- 7.588 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
- Agitators and mixers
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 1/2 in |
| Belt Width | 1 in |
| Pitch Diameter | 7.639 in |
| Belt Size | H |
| Hardened Teeth | With Hardened Teeth |
| Hub Type | A |
| Bore Type | Bushed |
| Material | Cast Iron |
| Type | GF-1 |
| Bushing Type | Quick Disconnect |
| Length Through Bore | 1.313 in |
| No. of Teeth | 48 |
| Bore Range [Min] | 1/2 in |
| Outside Dia. | 7.5880 in |
| Bore Range [Max] | 2 5/8 in |
| Bushing Series | SK |
| Finished Bore | N/A |
| Weight | 12.5 LB |
| EAN or UPC | 697950152288 |
