Find a Service Center
- 0.375 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 30 Number of Teeth
- 1.89 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 0.200 in |
| Material | Steel |
| Type | DF-1 |
| Hub Dia. | 1 3/8 in |
| Hub Projection | 0.218 in |
| Bushing Type | None |
| Bore Range [Max] | 1 1/16 in |
| Bushing Series | N/A |
| Pitch Diameter | 1.910 in |
| Belt Size | XL |
| Length Through Bore | 0.940 in |
| Hardened Teeth | Without Hardened Teeth |
| Set Screw Size | 8-32 x 1/8 |
| Finished Bore | N/A |
| Bore Range [Min] | 5/16 in |
| Belt Width | 1/4 in, 3/8 in |
| No. of Screws | 2 |
| No. of Teeth | 30 |
| Outside Dia. | 1.8900 in |
| Hub Type | B |
| Bore Type | Bushed |
| Weight | 0.41 LB |
| EAN or UPC | 697950114316 |
