Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 28 Number of Teeth
- 4.404 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hardened Teeth | With Hardened Teeth |
| Bushing Type | None |
| Belt Size | H |
| Finished Bore | N/A |
| Type | DF |
| Belt Pitch | 0.5 in |
| Material | Steel |
| Pitch Diameter | 4.456 in |
| Belt Width | 1 in |
| Bore Range [Max] | 2.625 in |
| Hub Projection | 1 1/8 in |
| Outside Dia. | 4.404 in |
| Hub Type | B |
| Bore Type | Reborable |
| No. of Teeth | 28 |
| Length Through Bore | 2.437 in |
| Bore Range [Min] | 0.75 in |
| Bushing Series | N/A |
| Hub Dia. | 3 5/8 in |
| Weight | 8.0 LB |
| EAN or UPC | 697950151762 |
