Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 28 Number of Teeth
- 4.404 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 28 |
| Belt Size | H |
| Finished Bore | N/A |
| Belt Width | 1 in |
| Bore Range [Min] | 0.75 in |
| Material | Steel |
| Bore Range [Max] | 2.625 in |
| Hub Dia. | 3 5/8 in |
| Type | DF |
| Length Through Bore | 2.437 in |
| Belt Pitch | 0.5 in |
| Bushing Series | N/A |
| Bushing Type | None |
| Pitch Diameter | 4.456 in |
| Bore Type | Reborable |
| Outside Dia. | 4.404 in |
| Hub Projection | 1 1/8 in |
| Hub Type | B |
| Hardened Teeth | With Hardened Teeth |
| Weight | 8.0 LB |
| EAN or UPC | 697950151762 |
