Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 24 Number of Teeth
- 3.766 in Outside Diameter
- H200 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Hub Dia. | 3 1/8 in |
| Hub Projection | 1 in |
| Bore Range [Min] | 1 in |
| Belt Width | 2 in |
| Outside Dia. | 3.766 in |
| Hub Type | B |
| Belt Pitch | 0.5 in |
| Belt Size | H200 |
| Length Through Bore | 3.343 in |
| No. of Teeth | 24 |
| Bore Type | Reborable |
| Bore Range [Max] | 2.125 in |
| Type | DF-1 |
| Hardened Teeth | With Hardened Teeth |
| Pitch Diameter | 3.82 in |
| Finished Bore | N/A |
| Material | Steel |
| Bushing Series | N/A |
| Weight | 7.5 LB |
| EAN or UPC | 697950151540 |
