Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 24 Number of Teeth
- 3.766 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Pitch Diameter | 3.820 in |
| Hardened Teeth | With Hardened Teeth |
| Bore Range [Max] | 2 1/8 in |
| Material | Steel |
| Hub Type | B |
| Bore Type | Reborable |
| Bore Range [Min] | 3/4 in |
| Bushing Series | N/A |
| Hub Projection | 1 in |
| Belt Size | H |
| Bushing Type | None |
| Belt Width | 1 1/2 in |
| Belt Pitch | 1/2 in |
| No. of Teeth | 24 |
| Length Through Bore | 2.812 in |
| Hub Dia. | 3 1/8 in |
| Type | DF-1 |
| Outside Dia. | 3.7660 in |
| Weight | 6.5 LB |
| EAN or UPC | 697950151526 |
