Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 24 Number of Teeth
- 3.766 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| No. of Teeth | 24 |
| Belt Size | H |
| Type | DF-1 |
| Belt Width | 1 1/2 in |
| Pitch Diameter | 3.820 in |
| Hardened Teeth | With Hardened Teeth |
| Outside Dia. | 3.7660 in |
| Hub Type | B |
| Bushing Series | N/A |
| Length Through Bore | 2.812 in |
| Bore Range [Min] | 3/4 in |
| Bore Type | Reborable |
| Hub Projection | 1 in |
| Bore Range [Max] | 2 1/8 in |
| Belt Pitch | 1/2 in |
| Material | Steel |
| Finished Bore | N/A |
| Hub Dia. | 3 1/8 in |
| Weight | 6.5 LB |
| EAN or UPC | 697950151526 |
