Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 22 Number of Teeth
- 1.381 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Bushed |
| Outside Dia. | 1.381 in |
| Hardened Teeth | Without Hardened Teeth |
| No. of Screws | 2 |
| Bore Range [Max] | 0.75 in |
| Hub Dia. | 1 in |
| Belt Size | XL037 |
| Bushing Type | None |
| Finished Bore | N/A |
| Belt Pitch | 0.2 in |
| Belt Width | 0.25 in, 0.375 in |
| Hub Type | B |
| Set Screw Size | 8-32 x 1/8 |
| No. of Teeth | 22 |
| Bore Range [Min] | 0.25 in |
| Bushing Series | N/A |
| Pitch Diameter | 1.401 in |
| Type | DF-1 |
| Material | Steel |
| Length Through Bore | 0.94 in |
| Hub Projection | 0.218 in |
| Weight | 0.22 LB |
| EAN or UPC | 697950110547 |
