Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 22 Number of Teeth
- 1.381 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 0.75 in |
| Bore Type | Bushed |
| Pitch Diameter | 1.401 in |
| Bushing Series | N/A |
| Hub Type | B |
| Belt Pitch | 0.2 in |
| Set Screw Size | 8-32 x 1/8 |
| No. of Screws | 2 |
| Belt Width | 0.25 in, 0.375 in |
| Belt Size | XL037 |
| Type | DF-1 |
| Bushing Type | None |
| Hardened Teeth | Without Hardened Teeth |
| Hub Projection | 0.218 in |
| Finished Bore | N/A |
| Material | Steel |
| Outside Dia. | 1.381 in |
| No. of Teeth | 22 |
| Bore Range [Min] | 0.25 in |
| Hub Dia. | 1 in |
| Length Through Bore | 0.94 in |
| Weight | 0.22 LB |
| EAN or UPC | 697950110547 |
