Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 21 Number of Teeth
- 3.29 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H |
| Hub Projection | 0.938 in |
| No. of Teeth | 21 |
| Material | Steel |
| Hub Type | B |
| Hub Dia. | 2 5/8 in |
| Pitch Diameter | 3.342 in |
| Belt Width | 1 1/2 in |
| Outside Dia. | 3.2900 in |
| Bushing Series | N/A |
| Bore Range [Min] | 3/4 in |
| Bore Type | Reborable |
| Type | DF |
| Hardened Teeth | With Hardened Teeth |
| Finished Bore | N/A |
| Length Through Bore | 2 3/4 in |
| Bushing Type | None |
| Bore Range [Max] | 3/4 in |
| Belt Pitch | 1/2 in |
| Weight | 5.39 LB |
| EAN or UPC | 697950151342 |
