Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 21 Number of Teeth
- 3.29 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 1/2 in |
| Finished Bore | N/A |
| Belt Size | H |
| Pitch Diameter | 3.342 in |
| Type | DF |
| Bore Range [Min] | 3/4 in |
| Hardened Teeth | With Hardened Teeth |
| Bore Type | Reborable |
| Bushing Series | N/A |
| Hub Projection | 0.938 in |
| Belt Width | 1 1/2 in |
| Outside Dia. | 3.2900 in |
| Bushing Type | None |
| Length Through Bore | 2 3/4 in |
| Material | Steel |
| Hub Dia. | 2 5/8 in |
| No. of Teeth | 21 |
| Bore Range [Max] | 3/4 in |
| Hub Type | B |
| Weight | 5.39 LB |
| EAN or UPC | 697950151342 |
