Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 21 Number of Teeth
- 3.29 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H |
| Pitch Diameter | 3.342 in |
| Outside Dia. | 3.29 in |
| Hub Type | B |
| Bore Range [Max] | 1.687 in |
| Finished Bore | N/A |
| Length Through Bore | 2.25 in |
| Belt Width | 1 in |
| Bore Range [Min] | 0.75 in |
| Hub Projection | 0.938 in |
| Hardened Teeth | With Hardened Teeth |
| Bore Type | Reborable |
| No. of Teeth | 21 |
| Belt Pitch | 0.5 in |
| Material | Steel |
| Bushing Series | N/A |
| Bushing Type | None |
| Hub Dia. | 2 5/8 in |
| Type | DF |
| Weight | 3.8 LB |
| EAN or UPC | 697950151335 |
