Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 21 Number of Teeth
- 3.29 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Bore Range [Max] | 1.687 in |
| Outside Dia. | 3.29 in |
| Finished Bore | N/A |
| Hardened Teeth | With Hardened Teeth |
| Bore Range [Min] | 0.75 in |
| No. of Teeth | 21 |
| Hub Type | B |
| Hub Projection | 0.938 in |
| Material | Steel |
| Belt Size | H |
| Bore Type | Reborable |
| Hub Dia. | 2 5/8 in |
| Type | DF |
| Pitch Diameter | 3.342 in |
| Belt Pitch | 0.5 in |
| Length Through Bore | 2.25 in |
| Belt Width | 1 in |
| Bushing Series | N/A |
| Weight | 3.8 LB |
| EAN or UPC | 697950151335 |
