Find a Service Center
- 0.875 in Belt Pitch
- 3 in Belt Width
- 20 Number of Teeth
- 5.462 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | B |
| Bushing Type | None |
| Material | Steel |
| Bore Type | Reborable |
| Hardened Teeth | With Hardened Teeth |
| Pitch Diameter | 5.57 in |
| Bushing Series | N/A |
| Bore Range [Min] | 1 in |
| Finished Bore | N/A |
| Bore Range [Max] | 3.25 in |
| Outside Dia. | 5.462 in |
| Belt Size | XH |
| Belt Width | 3 in |
| Belt Pitch | 0.875 in |
| Hub Dia. | 4 1/8 in |
| Hub Projection | 1 in |
| Type | DF |
| No. of Teeth | 20 |
| Length Through Bore | 4.625 in |
| Weight | 19.0 LB |
| EAN or UPC | 697950109800 |
