Find a Service Center
- 0.875 in Belt Pitch
- 3 in Belt Width
- 20 Number of Teeth
- 5.462 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 20 |
| Bushing Type | None |
| Type | DF |
| Length Through Bore | 4.625 in |
| Belt Size | XH |
| Bore Type | Reborable |
| Bore Range [Min] | 1 in |
| Outside Dia. | 5.462 in |
| Finished Bore | N/A |
| Bushing Series | N/A |
| Hub Type | B |
| Hub Projection | 1 in |
| Bore Range [Max] | 3.25 in |
| Belt Pitch | 0.875 in |
| Hub Dia. | 4 1/8 in |
| Pitch Diameter | 5.57 in |
| Belt Width | 3 in |
| Hardened Teeth | With Hardened Teeth |
| Material | Steel |
| Weight | 19.0 LB |
| EAN or UPC | 697950109800 |
