Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 20 Number of Teeth
- 2.357 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 3/8 in |
| Bore Range [Max] | 1 1/4 in |
| Material | Steel |
| Belt Width | 1/2 in |
| Bore Type | Reborable |
| Pitch Diameter | 2.387 in |
| Bushing Series | N/A |
| No. of Teeth | 20 |
| Hub Type | B |
| Belt Size | L |
| Bushing Type | None |
| Hub Projection | 5/8 in |
| Outside Dia. | 2.3570 in |
| Bore Range [Min] | 1/2 in |
| Finished Bore | N/A |
| Type | PB |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1 3/8 in |
| Hub Dia. | 1.687 in |
| Weight | 0.94 LB |
| EAN or UPC | 697950151274 |
