Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 20 Number of Teeth
- 2.357 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 2.3570 in |
| Finished Bore | N/A |
| No. of Teeth | 20 |
| Bore Type | Reborable |
| Belt Pitch | 3/8 in |
| Belt Size | L |
| Bore Range [Min] | 1/2 in |
| Bushing Series | N/A |
| Length Through Bore | 1 3/8 in |
| Hardened Teeth | Without Hardened Teeth |
| Pitch Diameter | 2.387 in |
| Hub Type | B |
| Type | PB |
| Hub Dia. | 1.687 in |
| Bushing Type | None |
| Bore Range [Max] | 1 1/4 in |
| Belt Width | 1/2 in |
| Material | Steel |
| Hub Projection | 5/8 in |
| Weight | 0.94 LB |
| EAN or UPC | 697950151274 |
