Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 18 Number of Teeth
- 2.119 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Projection | 5/8 in |
| No. of Teeth | 18 |
| Bushing Series | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Hub Type | B |
| Bore Range [Min] | 0.5 in |
| Belt Size | L075 |
| Outside Dia. | 2.119 in |
| Belt Pitch | 0.375 in |
| Belt Width | 0.75 in |
| Material | Steel |
| Hub Dia. | 1.562 in |
| Bore Range [Max] | 1.187 in |
| Pitch Diameter | 2.149 in |
| Bushing Type | None |
| Length Through Bore | 1.625 in |
| Bore Type | Reborable |
| Finished Bore | N/A |
| Type | PB |
| Weight | 0.9 LB |
| EAN or UPC | 697950151137 |
