Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 18 Number of Teeth
- 2.119 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Belt Width | 1/2 in |
| Outside Dia. | 2.1190 in |
| Bushing Type | None |
| Material | Steel |
| Pitch Diameter | 2.149 in |
| Bore Range [Max] | 1 3/16 in |
| Length Through Bore | 1 3/8 in |
| Hub Dia. | 1.562 in |
| Belt Pitch | 3/8 in |
| Hub Type | B |
| Bushing Series | N/A |
| Hub Projection | 5/8 in |
| Type | PB |
| Belt Size | L |
| Hardened Teeth | Without Hardened Teeth |
| No. of Teeth | 18 |
| Bore Range [Min] | 1/2 in |
| Bore Type | Reborable |
| Weight | 0.75 LB |
| EAN or UPC | 697950151113 |
