Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 18 Number of Teeth
- 2.119 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 3/8 in |
| Hub Type | B |
| Type | PB |
| Hardened Teeth | Without Hardened Teeth |
| Hub Projection | 5/8 in |
| Hub Dia. | 1.562 in |
| Bushing Type | None |
| Bore Range [Max] | 1 3/16 in |
| Bore Range [Min] | 1/2 in |
| Pitch Diameter | 2.149 in |
| Material | Steel |
| Bushing Series | N/A |
| Length Through Bore | 1 3/8 in |
| No. of Teeth | 18 |
| Outside Dia. | 2.1190 in |
| Belt Width | 1/2 in |
| Finished Bore | N/A |
| Belt Size | L |
| Bore Type | Reborable |
| Weight | 0.75 LB |
| EAN or UPC | 697950151113 |
