Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 18 Number of Teeth
- 2.811 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H100 |
| Material | Steel |
| Type | DF-1 |
| Bore Range [Max] | 1.5 in |
| Hub Projection | 0.688 in |
| Finished Bore | N/A |
| Hardened Teeth | With Hardened Teeth |
| Bushing Type | None |
| Pitch Diameter | 2.865 in |
| Bushing Series | N/A |
| Bore Range [Min] | 0.625 in |
| Outside Dia. | 2.811 in |
| Length Through Bore | 2 in |
| Bore Type | Reborable |
| Belt Width | 1 in |
| Hub Dia. | 2 1/4 in |
| Belt Pitch | 0.5 in |
| No. of Teeth | 18 |
| Hub Type | B |
| Weight | 2.8 LB |
| EAN or UPC | 697950151052 |
