Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 18 Number of Teeth
- 2.811 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 0.625 in |
| Finished Bore | N/A |
| Bushing Type | None |
| Hardened Teeth | With Hardened Teeth |
| Bushing Series | N/A |
| Belt Width | 1 in |
| Pitch Diameter | 2.865 in |
| Length Through Bore | 2 in |
| Type | DF-1 |
| Belt Size | H100 |
| Bore Type | Reborable |
| Hub Type | B |
| No. of Teeth | 18 |
| Belt Pitch | 0.5 in |
| Outside Dia. | 2.811 in |
| Bore Range [Max] | 1.5 in |
| Hub Dia. | 2 1/4 in |
| Hub Projection | 0.688 in |
| Material | Steel |
| Weight | 2.8 LB |
| EAN or UPC | 697950151052 |
