Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 17 Number of Teeth
- 1.999 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Reborable |
| Pitch Diameter | 2.029 in |
| No. of Teeth | 17 |
| Bore Range [Max] | 1.125 in |
| Bore Range [Min] | 0.5 in |
| Hub Type | B |
| Outside Dia. | 1.999 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.875 in |
| Hub Dia. | 1.437 in |
| Finished Bore | N/A |
| Belt Pitch | 0.375 in |
| Type | PB |
| Bushing Series | N/A |
| Material | Steel |
| Belt Width | 1 in |
| Belt Size | L100 |
| Bushing Type | None |
| Hub Projection | 5/8 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950151045 |
