Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 17 Number of Teeth
- 1.999 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | L100 |
| Outside Dia. | 1.999 in |
| Hub Projection | 5/8 in |
| Pitch Diameter | 2.029 in |
| Bore Type | Reborable |
| No. of Teeth | 17 |
| Bore Range [Min] | 0.5 in |
| Type | PB |
| Material | Steel |
| Bushing Type | None |
| Bushing Series | N/A |
| Hub Dia. | 1.437 in |
| Belt Width | 1 in |
| Hardened Teeth | Without Hardened Teeth |
| Finished Bore | N/A |
| Bore Range [Max] | 1.125 in |
| Hub Type | B |
| Belt Pitch | 0.375 in |
| Length Through Bore | 1.875 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950151045 |
