Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 16 Number of Teeth
- 0.999 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Screws | 2 |
| Bushing Type | None |
| Length Through Bore | 0.781 in |
| Hub Type | B |
| Belt Width | 1/4 in, 3/8 in |
| Pitch Diameter | 1.019 in |
| Bore Range [Max] | 1/2 in |
| Finished Bore | N/A |
| Belt Size | XL |
| Hardened Teeth | Without Hardened Teeth |
| Belt Pitch | 0.200 in |
| Hub Projection | 0.218 in |
| Bore Range [Min] | 1/4 in |
| Bushing Series | N/A |
| Outside Dia. | 0.9990 in |
| Set Screw Size | 8-32 x 1/8 |
| Material | Steel |
| Type | DF-1 |
| No. of Teeth | 16 |
| Hub Dia. | 0.687 in |
| Bore Type | Bushed |
| Weight | 0.1 LB |
| EAN or UPC | 697950102269 |
