Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 16 Number of Teeth
- 0.999 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Type | DF-1 |
| Outside Dia. | 0.9990 in |
| Material | Steel |
| Belt Pitch | 0.200 in |
| Belt Width | 1/4 in, 3/8 in |
| Bushing Series | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Bushed |
| No. of Teeth | 16 |
| Finished Bore | N/A |
| Bushing Type | None |
| Length Through Bore | 0.781 in |
| Set Screw Size | 8-32 x 1/8 |
| Hub Dia. | 0.687 in |
| Hub Projection | 0.218 in |
| Bore Range [Min] | 1/4 in |
| Pitch Diameter | 1.019 in |
| Bore Range [Max] | 1/2 in |
| Hub Type | B |
| Belt Size | XL |
| No. of Screws | 2 |
| Weight | 0.1 LB |
| EAN or UPC | 697950102269 |
